Designed for use in timber suspended or battened floors, the Polypipe suspended floor system uses aluminium double heat spreader plates to transmit the heat evenly across the finished floor surface.
Suitable for joist widths of 300mm to 450mm, the spreader plates are simply fixed to the joist using small nails or staples. The pipe is then run into the preformed grooves of the panels which are designed to hold the pipe securely at 225mm average centers.
A layer of insulation below the panels will ensure that almost all
of the heat generated passes up into the room. The Polypipe suspended
floor system is also suitable for use with "sprung" flooring systems as
used in sports halls etc.
The player will show in this paragraph. If you cannot see a video, please check whether you have the latest Flash Player installed.
| Key Design and Installation Information | |
| Max Heat Output | approx. 70W/m² |
| Recommended design flow temperatures | 60°C |
| Max Circuit Length | 80m (15mm pipe) 100m (18mm pipe) |
| Max Coverage Per Circuit Single Heat Spreader Plates |
25.8m² at 300mm centres (15mm pipe) 30m² at 300mm centres (18mm pipe) |
| Max Coverage Per Circuit Double Heat Spreader Plates |
17m² at 225mm centres (15mm pipe) |
