Polypipe underfloor heating in solid or screeded floors incorporates the unique Polypipe screeded floor panel. The lightweight plastic floor panels nest for easy storage and carrying.
Polypipe has the perfect solution for installing underfloor heating into solid or screeded floors. Utilising our unique lightweight plastic floor panels, which are quick and easy to cut to size, it is possible to fit Polypipe underfloor heating into any shaped room.
Polypipe solid floor panels form a simple grid to ensure the fastest possible pipe laying and also provide a precise guide for the pipe, ensuring that the minimum pipe bending radius is achieved. The panels are laid above pre-installed insulation and the system includes edging insulation strip to ensure maximum performance and efficiency.
Polypipe underfloor heating systems can be used with the following solid floor constructions:
- Sand and cement screed (4:1 mix)
- Pumped screed systems (anhydrite, etc.)
- Fine or heavy concrete
- Polymer modified screeds
The player will show in this paragraph. If you cannot see a video, please check whether you have the latest Flash Player installed.
| Key Design and Installation Information | |
| Max Heat Output | approx. 100W/m² |
| Recommended design flow temperatures | 50°C |
| Max Circuit Length | 100m (15mm pipe) 120m (18mm pipe) |
| Max Coverage Per Circuit | 11.1m² at 300mm centres 21m² at 200mm centres 30m² at 300mm centres (18mm pipe) |
